|
|
Centre
Drills - Type 'A' |
| |
|
Cylinderical
Milling Cutters |
| A cutter with peripheral
teeth primarily used for surface milling. |
| |
 |
Side
& Face Cutters (Straight Teeth) |
| A cutter
with teeth on the periphery and on both sides. |
| |
 |
Single
Angle Cutters |
| A cutter
with teeth on the conical surface and on a large
flat side. |
| |
 |
Double
Angle Cutters |
| A cutter
with teeth on the conical surfaces and with unequal
angles between the conical sides and the plane of
intersection of the two cones. |
| |
 |
Convex
Milling Cutters |
| A cutter
having a convex half circle in the form and having
top relief only. The cutter will have radially machine
relieved teeth. |
| |
 |
Concave
Milling Cutters |
| A
cutter having a concave half circle in the form
and having radially machine relieved teeth and tool
Type 'N'. |
| |
 |
Taper
Shank End Mill |
| A
cutter with teeth on the periphery and end, and
integral with a Morse Taper Shank for holding and
driving. |
| |
 |
Taper
Shank End Mill - Long Series |
| A
cutter with teeth on the periphery and end, and
integral with a Morse Taper Shank for holding and
driving. |
| |
 |
Woodruff
Key Slot Milling Cutters - Type 'A' - Straight
Teeth |
| A cutter
having definite diameter and width, with sides slightly
concave, designed for cutting seatings in shafts
for woodruff keys and integral with a parallel shank
for holding and driving. |
| |
 |
Cutters
For Woodruff Keyseats |
| A cutter
having definite diameter and width, with sides slightly
concave, designed for cutting seatings in shafts
for woodruff keys and integral with a parallel shank
for holding and driving. |
| |
|
Parallel
Hand Reamers |
| A reamer
having virtually parallel cutting edges with taper
and bevel lead, a shank of the nominal diameter
of the cutting edges and with a square of the end. |
| |
|
Long
Fluted Machine Reamers |
| A reamer
having virtually parallel cutting edges, with bevel
lead integral with a taper shank for holding and
driving. |
| |
|
Parallel
Machine Reamers |
| A reamer
having virtually parallel cutting edges, with bevel
lead integral with a taper shank for holding and
driving. |
| |
|
Hand
Taper Pin Reamers |
| A reamer
having taper cutting edges and a parallel shank
with a square of the end for holes to suit pins
with a taper |
| |
|
Machine
Taper Pin Reamers |
| A reamer
having taper cutting edges for holes to suit pins
with taper integral with a taper shank for holding
and driving. |
| |
 |
Countersinks
With Taper Shanks |
| A cutter
with teeth on the conical cutting faces, integral
with a taper shank for holding and driving designed
to produce a conical seating to accomodate the conical
head of a component such as a screw or rivet. |
